Pacto Pedestal

Floor-standing range

The Pacto Pedestal is a single-outlet universal Type 2 socket charger. It is available in both online and offline models and can be wall-mounted as well as floor-standing on a pedestal. The Pacto is a smart, robust charger with flame-retardant 5VA plastic housing and an IP54 weather rating. It charges at up to 7.4kW on a single-phase connection.

view full specification

The Pacto Pedestal


The Pacto Pedestal is a floor-standing single-outlet universal Type 2 socket charger. It is available in both online and offline models and can be wall-mounted as well as floor-standing on a pedestal. The Pacto is a smart, robust charger with flame-retardant 5VA plastic housing and an IP54 weather rating. It charges at up to 7.4kW on a single-phase connection and has a 6mA DC leakage detection in-built. This means you can use it with a normal Type A RCD in your consumer unit.

 

Dynamic Load Balancing is built into the unit and operates over a local network connection, managing power distribution around a cluster of chargers. Our Dynamic Load Balancing ensures that the power on-site does not exceed the available load.

 

The Pacto online version connects via Ethernet to an online management system such as the Sevadis Cloud for remote charger management, usage tracking, billing and receiving payments. Users start the charge with either an RFID card or via the Sevadis Cloud Web App.

 

The Pacto is fully compliant with OCPP version 1.6. OCPP gives flexibility to the charge point owner and allows them to choose and change the online billing and management platform provider on-demand without needing to replace the charge points.

 

The display screen is user friendly and shows how much electricity the car is using, how long the car has been charging and the overall consumption of the charge once it is completed.

 

The multi-colour LED ring around the plug socket shows the charger status– such as if the charger is available for use or is charging.

 

The Pacto is OLEV approved for the home and work-place charging schemes and provides a reliable competitive solution to the housing market.

Technical specification
Mounting type Floor-standing on a pedestal
Maximum current 7.4 kW
Power supply cable cross-section Suggested minimal cross-section
• 2.5 mm2 (16A nominal current)
• 6.0 mm2 (32A nominal current)
Supply voltage (Europe) 1 x 230 V AC
Voltage frequency 50 Hz/60 Hz
Overcurrent protection Not part of the device. The protection must be made in compliance with the local regulations and with the device version.
Residual current device Integrated 6 mA DC
Protection class Class 1
Socket variant Type 2, standard socket 32 A/400 V AC according to EN 62196-1
Certifications CE, IEC 61851-1, IEC 61851-22, IEC 60950-1, IEC 60950-22