Stilo

Wall-mounted range

The Sevadis Stilo is a wall-mounted tethered charger with a Type 2 integrated charging cable. It is OCPP 1.6 compliant and has optional dynamic load balancing capability built in.
 
The Stilo supports both single-phase and three-phase power connection with output from 3.7kW to 22kW. Finished in an attractive brushed aluminium casing it is both robust, aesthetically pleasing and suitable for all environments.
 
view full specification

The Stilo


The Sevadis Stilo is a wall-mounted tethered charger with smart online functionality. Finished in attractive brushed aluminium it is robust, aesthetically pleasing, and suitable for all environments. The unit supports both single-phase and three-phase power connection with output from 3.7kW to 22kW.

 

The unit is also OCPP-compatible, for connection to the Sevadis Cloud online management system or to OCPP platforms provided by others.

 

Communications to the internet are available via WiFi or ethernet, depending on the availability at each location. The Sevadis Stilo can also be configured with optional integrated load-balancing for ensuring that the incoming electricity supply is not overloaded from excessive use of the chargers when in a cluster.

 

With the load-balancing option, the system automatically down-rates and limits the total consumption of the clustered charging stations according to the maximum set on the master unit.

 

The Sevadis Stilo is OZEV-certified, which enables the UK government Homecharger and Workplace charging schemes rebate to be claimed.

Technical specification
Power supply cable inlet Surface mounted
Maximum current 22 kW
Power supply cable cross-section Suggested minimal cross-section
• 2.5 mm2 (16A nominal current)
• 6.0 mm2 (32A nominal current)
Supply voltage (Europe) 3 x 230 V/400 V AC
Voltage frequency 50 Hz/60 Hz
Type of network TN, TT
(IT on special request)
Overvoltage Category Ill according to EN 60664-1
Short-time withstand current Effective value < 6 kA according to EN 61439-1
Overcurrent protection Not part of the device. The protection must be made in compliance with
the local regulations and with the device version.
Residual current device Integral part of the RCD device A < 30 mA AC
Protection class Class 1
Vehicle connection 5 m cable with Type 2 plug